Hook onto rope and webbing to quickly connect objects, fittings, and other lengths of rope

Add flexible connection points to E-Tracks for securing loads in different directions

Pair with bolts or threaded rod to lift and hang components

Install and remove eyebolts and screw-in hooks

Secure in through-holes with the included nut for use in lifting applications

Attach hooks and shackles for lifting

Fasten to a beam or ceiling and your fall-arrest lanyard to catch you if you fall

Suspend pipe and other fixtures with wire or cable ties

Pivot to resist stress that would bend or break an eyebolt when lifting at an angle

Add pivoting connection points to L-Tracks to secure loads in different directions

Retain their strength in temperatures as low as -40° F

Coated in matte black-oxide to blend into your setup

Prevent your wire or cable from snagging

Attach to rod ends to increase the amount of misalignment they can handle

Keep dirt out and lubrication in to extend the life of rod ends

Use with connecting rods to support loads and control steering, tensioning, or pivoting motion

Temporarily secure rope

Route and protect rope

Rotate the eye to match the angle of your load

A contoured groove in the eye reduces wear and kinks on your wire rope

Thread directly into wood with the sharpened end point

Secure in through-holes with the included nut

Direct wire and other lightweight material

Suspend wire and cable by feeding it through the eyehole

Often used with wire to hang pictures

Hang lightweight items such as suspended ceilings and lighting fixtures

Use as fixed anchor points

Prevent tools from falling while working at height

Weld into place to create a permanent routing connection

Create a permanent anchor point or use as webbing guides

Prevent webbing from twisting and use as anchor points; also known as footman's loops